Special features in the program sequence
48
Spinning
Final spin speed
When a program is selected, the
maximum spin speed for this wash
program is shown in the display.
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart.
Rinse-spin
There is a spin cycle after the main
wash and between the rinse cycles. A
reduction in the final spin speed will
also reduce the rinse-spin speed as
appropriate.
Deselecting the rinse-spin and final
spin
Select the program setting Spin
speed 0.
After the last rinse cycle, the water will
be pumped away and the anti-crease
phase will switch on.
Anti-crease
At the end of the program, the drum
continues to turn at intervals for up to
30minutes to help prevent creasing.
The washing machine can be opened at
any time.
There is no anti-crease phase at the
end of some programs.
To Next Page
Loading...
Need help?
General
