Miele PWM 906 User Manual

Supervisor level
82
"Display" off status
The display switches off to save
energy. The Start/Stopsensor control
flashes slowly.
Changing this setting leads to increased
energy consumption.
Off
The display does not switch off.
On (10 min), not curr.prog.
The display will remain on while the
program is running but will go out
10minutes after the end of the
program.
Logo (10 min), not curr.prog.
The display stays switched on while the
program is running. The logo lights up
10minutes after the end of the
program.
On after 10 min.
The display will go out after 10minutes.
On (30 min), not curr.prog.
The display will remain on while the
program is running but will go out
30minutes after the end of the
program.
Logo (30 min), not curr.prog.
The display stays switched on while the
program is running. The logo lights up
30minutes after the end of the
program.
On after 30 min.
The display will go out after 30minutes.
"Machine" off status
In order to save energy, the washing
machine will switch off automatically
after the end of the program or if no
further selection is made. You can
change this setting.
Changing this setting leads to increased
energy consumption.
– No switch off
– Switch off after 15minutes (factory
default)
– Switch off after 20minutes
– Switch off after 30minutes
Delay start
The delay start (timer) display can be
switched on or off.
Factory default: On
Memory
The washing machine will save the
settings which have been selected for
a program (temperature, spin speed,
and some of the options) after the
program has started.
When the program is chosen again, the
saved settings will appear in the
display.
Factory default: Off

Miele PWM 906 Specifications

General

Brand	Miele
Model	PWM 906
Category	Washer
Language	English