Miele PWM 906 User Manual

Supervisor level
83
Temperature unit
You can select the unit for the
temperature display.
Factory default: °F
Weight unit
You can decide whether load
quantities are displayed in “kg” or
“lbs”. You can also switch this
information off altogether.
Factory default: lbs
Logo
You can choose whether the “Miele
Professional” logo or your own logo
appears in the display.
The option Launderette ext. (12
prog)must be selected for the
settingControls.
Change code
You can alter the access code to the
Supervisor level.
 Enter the current code.
 Enter a new code.
Program selection
Controls
You can select whether the washing
machine is operated as a “wash-
salon” (launderette) machine.
Shortcuts are the easiest way to
operate the machine. Users are unable
to change pre-set programs.
Useful tip: Start by configuring all
necessary settings and changes to the
washing machine before adjusting any
of the options below.
If “Laundromat, basic” or “Laundromat,
ext.” are selected, the Supervisor level
can no longer be opened from the
display after the Supervisor level is
closed. Please follow the instructions
below if you wish to change any other
settings.
Opening the Supervisor level
(launderette version)
 Switch on the washing machine and
open the door.
 Touch the Start/Stopsensor control
and hold it down while carrying out
steps–.
 Close the washing machine door.
 The Start/Stop sensor control will
now be flashing quickly; wait until it
lights up constantly.
 Release the Start/Stopsensor
control when the Start/Stopsensor
control lights up constantly.

Miele PWM 906 Specifications

General

Brand	Miele
Model	PWM 906
Category	Washer
Language	English