Supervisor level
79
Opening the Supervisor level
Switch on the washing machine.
11:02
Programs Favourites Supervisor
Help
Touch the Supervisorsensor
control.
The display will switch to the Supervisor
levelmenu.
Code-based access
The Supervisor level is accessed using
a code.
The code is 000 (factory default).
Changing the code
You can alter the Supervisor level
access code to protect the washing
machine from unauthorized access.
Please inform Miele Service if you
have forgotten your new code. Miele
Service will have to reset the code.
Make a note of your new code and
store it in a safe place.
Closing the settings menu
Touch the sensor control.
The display will then go back to the
previous menu level.
Touch the sensor control.
The display will change to the main
menu.