Miele T 4859 Ci User Manual

Control panel
a Miele{home
Symbol for Miele|home enabled
appliance
b Information sensor :
The sensor lights up when
information about the menu in the
display is available.
c Service interface
This is used by service technicians
to run diagnostic checks on your
machine, or to update programming
data in the future.
d Selector sensors
A sensor is active when it is lit up.
See next page for more information.
e Display
For showing:
–
the functions selected
–
the programme sequence
–
information
–
error messages
–
the time of day
–
the position of an entry using the
scroll bar
f Clear sensor U
–
For returning to the previous menu.
– For returning to the main menu when
touched twice.
– For deleting the values set
previously.
– For cancelling the programme.
g Start sensor
The programme selected is started
by touching this sensor when it is
illuminated green.
h K button
For switching the dryer on and off.
To save energy the dryer will switch
off automatically 15 minutes after the
end of the programme/anti-crease
phase or 15 minutes after the dryer is
switched on if it is not operated.
i / button
For opening the door. The dryer
does not need to be switched on at
the mains.
Operating the tumble dryer
14

Miele T 4859 Ci Specifications

General

Control type	Buttons
Display type	LCD
Loading type	Front-load
Drying system	Condensation
Product color	Stainless steel
Built-in display	Yes
Appliance placement	Freestanding
Drying class	-
Drum capacity	6 kg
Maximum spin speed	1400 RPM
Delay start (max)	24 h
Current	13 A
Connected load	2850 W
AC input voltage	220-230 V
AC input frequency	50 Hz
Energy consumption	3.35 kWh
Annual energy consumption	265 kWh

Weight and Dimensions

Depth	575 mm
Width	595 mm
Height	820 mm
Weight	52000 g
Depth with door open	1150 mm