4. Remove the laundry
35
End of programme/Anti-crease
At the end of the programme: Anti-
crease (if select
ed) or
Finish will light
up. The
Start/Stop sensor will no longer
be lit up.
To save energy, 10 minutes after the
end of the pr
ogramme, the
Start/Stop
sensor will
begin to flash slowly and the
display will go out.
The dryer will switch off automatically
15 minu
tes after the end of the anti-
crease phase (with programmes without
an anti-crease phase it will switch off
15 minutes after the end of the pro‐
gramme).
Remove the laundry
Never
open the door before the
drying process has finished.
P
ull the door open at the side with
the orange marker.
Remo
ve the laundry.
Check that all items have been re‐
moved from the drum.
If items are left in the dryer, they
could be damaged by overdrying
when the dryer is next used.
If the dryer is switched on at the mains
and the door is opened, the drum light‐
ing will come on. It will go out a few mi‐
nut
es later to save energy.
If the d
ryer is still switched on, switch
it off with the button.
A buzzer will sound.
Remo
ve the fluff from the 2 fluff filters
in the door opening: see "Cleaning
and care - Fluff filters".
Shut the door with a gentle swing.
Empty t
he condensed water contain‐
er.
Tip: Th
e condensed water can be used
for the
Steam smoothing pr
ogramme.
See "Cleaning and care - Preparing the
condensed water container for Steam
smoothing".
We recommend that you drain the con‐
densed wat
er externally through the
drain hose when drying a full load using
the
Cottons
and
Cottons pr
o‐
grammes. This will avoid having to
empty the condensed water container
during the programme.
To Next Page
Loading...
Need help?
General
