Installation and connection
88
Refitting
7. Refit the door
P
ress the rubber seal back into the
grove on the door.
P
osition the door in front of the dryer.
Fit the base of the door hinge with its
2 pins int
o the openings on the dryer.
The base of the door hinge must be
flush with the fr
ont panel of the dryer.
The door cannot fall off in this position.
Scr
ew the door securely to the dryer
at the base of door hinge .
Now that you have changed the door
hinging the door will open from the
opposite side.
P
ush the orange marker round to the
other side so that you will see at
which side to pull the door open.
Important
Please keep the lock catch and door
hi
nge covers which were no longer
needed in a safe place. These will be
required if, for example, you move
house and need to change the door
hinging back to its original position.
To Next Page
Loading...
Need help?
General
