Changing the programme sequence
52
You cannot change to another pro‐
gr
amme once a programme has started
(this prevents unintentional alterations).
You will need to cancel the current pro‐
gr
amme before you can select a new
one.
Once a programme has star‐
t
ed . . .
. . . cancelling the programme and
then selecting a n
ew programme
T
ouch the Start/Stop sensor.
Confirm Cancel programme.
– Cooling down will light up in the dis‐
p
lay, depending on the drying dura‐
tion and the drying temperature
reached.
– Wait until Programme cancelled lights
up.
P
ress the button to switch the dry‐
er off.
P
ress the button to switch the dry‐
er on.
Selec
t and start a new programme
straight away.
. . . changing the programme
You can still select or deselect the Anti-
crease
option. It is no longer possible to
change other options which were selec‐
ted before the programme started or to
change the duration or the drying level.
T
ouch the Change. sensor.
Confirm Extras.
Touch OK to confirm.
. . . saving the programme
You can save a programme which is
runni
ng as a Favourite programme.
T
ouch the Save sensor.
Please
read the information under
"Favourite programmes" from "2. To
enter a name".
Adding or removing laundry af‐
t
er a programme has started
Restar
t the programme immedi‐
ately after adding or removing items.
Otherwise remove all items and
spread them out to cool down com‐
pletely.
Danger of burning.
Do not touch the back of the drum
when adding o
r removing items. The
drum and the items can be very hot.
Open the door
.
Add or remove items.
Clo
se the door.
T
ouch the Start/Stop sensor to contin‐
ue the programme.
Programme duration
Altering the programme sequence can
cause the
programme duration shown
in the display to be adjusted.
To Next Page
Loading...
Need help?
General
