Miele TMV 840 WP User Manual

Settings menu
94
Buzzer volume
The buzzer sounds to indicate the end
of the pr
ogramme. It can be set to be
louder or quieter or switched off.
The continuous tone which sounds
when ther
e is a fault is independent of
the buzzer.
The setting selected is shown in a bar
char
t.
Factory default: a medium setting.
– Switched off      
– Quieter      

– Louder       
You will hear the buzzer change as the
setting is selected.
 Confirm with the OK sensor
.
Keypad tone
When this setting is activated a tone
will sound each time a sensor is
t
ouched.
Options
– On
– Off (F
actory default setting)
Conductivity
 The Low option should only be
sel
ected if the residual moisture
reading in your laundry is incorrect
due to extremely soft water.
Options
– Normal (F
actory default setting)
– Low
Conditions
The Low option should only be set if the
wat
er used for washing the laundry is
extremely soft with a conductivity read‐
ing (electrical conductivity) less than
150 μS. Contact your local water au‐
thority for the conductivity level of your
mains water supply.
 O
nly activate the Low option if
the above conditions are present.
Otherwise drying results will be un‐
satisfactory.

Miele TMV 840 WP Specifications

General

Brand	Miele
Model	TMV 840 WP
Category	Dryer
Language	English