Delay start
44
To select delay start
With delay start you can delay the start
of the pr
ogramme by up to a maximum
of 24 hours. This allows you, for exam‐
ple, to make use of the cheapest ener‐
gy tariffs.
Please note that the time of day must
be entered correctly for the delay start
function to work.
After selecting the programme touch
the Start at sensor.
Tip: V
ia Settings you can select a time
for the programme to finish at, instead
of start at. In this case Finish at will light
up in the display.
Use the – and + sensors t
o set the
time (minutes are set in blocks of 15
minutes).
Co
nfirm each entry by touching the
OK sensor
.
To begin delay start
T
ouch the flashing Start/Stop sensor.
The time at which the programme will
start automatically will appear in the
display.
The drum will turn briefly every hour un‐
til the star
t of the programme to reduce
creasing.
To change delay start
T
ouch the Change sensor.
T
ouch the sensor which shows the
programme start time.
You can either start the programme im‐
mediat
ely or change the time:
T
ouch the appropriate sensor to do
this.
To add/remove laundry after
delay star
t has started count‐
ing down
Y
ou can open the door to add/
remove laundry.
T
ouch the flashing Start/Stop sensor
so that the time continues to count
down.
To cancel delay start
T
ouch the Start/Stop sensor.
Confirm Cancel delay start.
To Next Page
Loading...
Need help?
General
