1 Preface
BNCLJS01 / 2020403
BNCLJS01 0000212827 B.5 9/29/20 9:31 AM Released
1.1 About This Operator Guide and This MilTouch™
Washer-extractor
BNCLJS01.C01 0000212826 A.10 B.5 B.13 9/11/20 8:29 AM Released
This operator guide applies to the following machine model(s):
• 30022V8Z
• 30015V8Z
• 30022VZZ
• 30015VZZ
• 36021V5Z
• 36021V7Z
• 36026V5Z
• 36026V7Z
• 42026V6Z
• 42030V6Z
This operator guide explains routine operation. It is for the operator and for supervisory personnel
responsible for operator training. The machine must be fully commissioned and ready before you
attempt to operate it. A separate controller reference manual is available from Milnor for use by
technicians involved in the commissioning, programming, and servicing of the machine.
WARNING: Careless use — can cause death or serious injury and property damage.
� Read the machine manuals before you install, operate, service, or clean
the machine.
� Do not attempt to service the machine or reach into normally-guarded
areas unless you are a qualified service technician.
This MilTouch™ industrial washer-extractor has one or more physical switches and buttons
(electromechanical controls), as well as a touch-sensitive display screen with virtual controls.
Use the electromechanical controls to apply power, unlock the door, stop the machine immedi-
ately (if necessary), and load and unload the machine. Use the touch-actuated controls on the Mil-
Touch™ display screen to select, run, and monitor formulas.
Pellerin Milnor Corporation 3
6
To Next Page
Loading...
Need help?
General
