Milnor C Series User Manual

Pellerin Milnor Corporation 21
Modify Water Level — Touch the box identified by item Lw on Figure 14 .
Figure 21. Pop-up Controls for Water Level
Increase the desired bath water level by 1 unit (centimeters or inches).
Decrease the desired bath water level by 1 unit (centimeters or inches).
Close the window.
When you are finished making changes to the wash formula, touch
to end formula
intervention.
4.1.4 To Cancel a Formula
BNCLJB01.T01 0000204083 A.10 C.3 E.3 9/11/20 12:09 PM Released
1. Touch on the Run display to cancel a formula.
Figure 22. Resume or Cancel the
Formula
2. A dialog box appears (Figure 22 ) that prompts you
to confirm your decision. On the dialog box, touch
to cancel the formula.
3. The controller disables all outputs, drains the bath
water through the normally-open drain valve (usually
the drain valve to the sewer), unlocks the door to the
washer-extractor, and returns to the Home display.
Troubleshooting
24

Milnor C Series Specifications

General

Brand	Milnor
Model	C Series
Category	Washer
Language	English