Mindray BeneView T6 Service Manual

7-4
7.3 Upgrading Functional Assemblies
You can up g ra de th e follo w i ng funct i onal as se mb lies:
Functional
assembly
PN Description Remark
SMR 6800-30-50641 SMR kit /
801-6800-00108-00
6800 wireless network
upgrade kit
Internal AP,
for standard- configured
patient monitor
801-6800-00109-00
6800 wireless network
upgrade kit
Internal AP,
for fully configured
patient monitor
Wireless
network
801-6800-00002-00 Wireless network adaptor kit External AP
Recorder 6800-30-50856 Recorder upgrade kit /
Analog
output
801-6800-00093-00 DVI interface board (FRU) /
iView
assembly
115-016498-00
iView assembly (SSD hard
drive)
/
The patient monitor can be connected to network through wireless AP. Authorized personnel
are required to connect and set up the wireless network, and then carry out the performance
test.
7.3.1 Upgrading SMR
The SMR can be connected to the patient monitor through SMR connector via a SMR cable.
Refer to the Operator’s Manual for detail.
7.3.2 Upgrading Wireless Network Function
Refer to the conrresponding section to install the wireless network assembly in your patient
monitor.
Refer to the Operator’s Manual for the use of wireless network.

Mindray BeneView T6 Specifications

General

Brand	Mindray
Model	BeneView T6
Category	Medical Equipment
Language	English