FX-2000 User Guide
18
2. Bypass Menu
Use the Bypass Menu when you want to bypass or unbypass devices, hardware circuits, complete
addressable loops, or outputs such as relays and signals.
To enter the Bypass Menu, you must be in the Command Menu. To enter the Command Menu,
press MENU ( ) when the display is in normal mode.
The following subsections provide instructions on using each Bypass Menu option.
Step 4: If the screen shows...
...the display will return to the Reports Menu.
OR
If the display shows...
•Press and hold INFO ( ) to view the details.
•Use and to scroll the cursor through the
records.
•Press CANCEL ( ) to exit to the Reports Menu.
Step 1: Select the Bypass Menu
1. Use and to scroll the cursor to “Bypass”.
2. Press ENTER ( ) to select the Bypass Menu.
Step 2: Enter your passcode (if required)
Enter your passcode. See page 26 for instructions on
entering passcodes.
Step 3: Select the option you would like to view
1. Use and to scroll the cursor through the
Bypass Menu.
2. Press ENTER ( ) to select an option.
Press CANCEL ( ) to exit and return to the Bypass
Menu. Repeat to exit to the Command Menu.
Loop 2
Address 001
Low Profile ION
Det
- Command Menu
-
1 Reports
2 Bypass
^
Enter
passcode for
level 2 or
higher:
- Bypass Menu
-
1 Device /
Circuit
To Next Page
Loading...
Need help?
General
