Mircom FX-2000 series User Guide

Front Panel Menu Operation
25
Alternate Menu Option #3: Manual Control Enable
This option provides security on the panel control buttons by requiring the user to enter a passcode
or activate a key switch before a specific button will operate. This “manual control” feature is set up
using the Configurator, and can affect any number of control buttons. Selecting the Enable
Required option in the Command Menu or turning the key switch allows you to activate and
deactivate this feature.
Selecting Manual Control Enable from the Menu
To select the Enable Required option, you must be in the Command Menu. To enter the Command
Menu, press MENU ( ) when the display is in normal mode.
The display will now show the message “Manual control enabled” while in normal mode, and the
panel will be in a trouble condition. To check which annunciator manual control was enabled on,
press the INFO ( ) button. To disable manual control, follow the same steps outlined above.
Selecting manual control enable using a key switch
You can set up the FX-2000 to require the activation of a key switch instead of a passcode to
enable manual control. Once the key switch is operated, the display will show the message
“Manual control enabled” while in normal mode, and the panel will be in a trouble condition. To
check which annunciator manual control was enabled on, press the INFO ( ) button. To disable
manual control, reset the key switch.
Notes:
•You will see this option in the Command Menu only if your system has been
programmed for manual control.
•This feature does not change after a system reset.
Step 1: Select Manual Enable
1. Use and to scroll the cursor to “Man Ctrl
Enable”.
2. Press ENTER ( ) to continue.
Step 2: Enter your passcode
Enter your passcode. See page 26 for instructions on
entering passcodes.
Step 3: Enable manual control
1. The systems now asks you whether or not you would
like to enable manual control. Use and to
select “yes” or “no”.
2. Press ENTER ( ) to continue.
- Command Menu
-
1 Reports
2 Bypass
Enter
passcode for
level 1 or
higher:
Manual
control
currently
disabled.

Mircom FX-2000 series Specifications

General

Brand	Mircom
Model	FX-2000 series
Category	Control Panel
Language	English