Mircom QX-mini User Manual

43
Installation
9. Remove all necessary knockouts.
Figure 15 QX-mini-LOC knockouts and board anchors
10. Attach the doors to the chassis and then secure the ground straps to the doors using the
wingnuts removed in step 3.
11. Secure the CH-1139A PCB bracket to the backbox using the screws removed in step 2.
12. Connect the ribbon cable from the main display to terminal P1 on the main board.
13. Connect the microphone cable to terminal TS6 on the main board.
Knockouts
Ground Wire Anchor
Standos

Mircom QX-mini Specifications

General

Brand	Mircom
Model	QX-mini
Category	Security System
Language	English