Mitsubishi Electric AJ65BT-D62 User Manual

MELSEC-
A
10. PROGRAMMING
10 - 30
10.5.4 Program example of ring counter function
Network parameter settings with dedicated command RLPA
Automatic refresh parameter settings with dedicated command RRPA
Synchronous mode is
invalid.
No. of modules connected
: 1
Station information of
high-speed counter module
(remote device station, 4
stations occupied, station
number 1)
Dedicated command
(RLPA)
Head I/O number of
master module
Parameter storage head
device
Device that turns on 1
scan at completion
Parameter status reading
at abnormal completion
RX head number is set.
"X" is set.
X400 is set.
128 points is set.
RY head number is set.
"Y" is set.
Y400 is set.
128 points is set.
RW head number is set.
"D" is set.
D200 is set.
263 points is set.
SB head number is set.
"B" is set.
B0 is set.
512 points is set.
SW head number is set.
"W" is set.
Downloaded from ManualsNet.com search engine

Mitsubishi Electric AJ65BT-D62 Specifications

General

Brand	Mitsubishi Electric
Model	AJ65BT-D62
Category	Control Unit
Language	English