Mitsubishi Electric CITY MULTI PAC-AH001-1 User Manual

Before starting the test run
CAUTION
• Turn on the power at least 12 hours before starting operation.
- Starting operation immediately after turning on the main power switch can result in
severe damage to internal parts. Keep the power switch turned on during the operational
season.
• Do not touch the switches with wet fingers.
- Touching a switch with wet fingers can cause electric shock.
• Do not touch the refrigerant pipes during and immediately after operation.
- During and immediately after operation, the refrigerant pipes are may be hot and may
be cold, depending on the condition of the refrigerant flowing through the refrigerant
piping, compressor, and other refrigerant cycle parts. Your hands may suffer burns or
frostbite if you touch the refrigerant pipes.
• Do not operate the air conditioner with the panels and guards removed.
- Rotating, hot, or high-voltage parts can cause injuries.
• Do not turn off the power immediately after stopping operation.
- Always wait at least five minutes before turning off the power. Otherwise, water
leakage and trouble may occur.
PAC-AH001-1
Specifications are subject to change without notice. 14
ENGLISH

Mitsubishi Electric CITY MULTI PAC-AH001-1 Specifications

General

Brand	Mitsubishi Electric
Model	CITY MULTI PAC-AH001-1
Category	Controller
Language	English