Mitsubishi MA Series User Manual

16
4.2.2 Auto Mode Setting
The following settings can be made.
ON (default) : Auto mode is displayed when selecting an operation mode only if the unit to be connected supports the auto
mode.
However, this does not apply if the unit to be connected does not support the auto mode.
Operation mode can be switched:
COOL DRY FAN HEATAUTO
OFF : Even if the unit supports the auto mode, auto mode is not displayed when selecting an operation mode.
Operation mode can be switched :
COOL DRY FAN HEAT
■
Display ex am ple
CHANGE
LANGUAGE
FUNCTION
SELECTION
MODE
SELECTION
DISP MODE
SETTING
SELECT
AUTO MODE
SELECT
AUTO MODE
How to Set Auto Mode
(1) While pressing the
MODE
button, press the
ON/OFF
button for two seconds to activate the remote controller’s
function selection mode.
(2) Press the
MODE
button to select
FUNCTION
SELECTION
on the screen (at ).
[Display ]
(3) Press the
MENU
button so that
SELECT
AUTO MODE
appears on the screen (at ).
* The current setting is displayed.
(4) Press the
ON/OFF
button to select whether auto mode is to be used (on) or not (off).
[Display ]
(5) While pressing the
MODE
button, press the
ON/OFF
button for two seconds to return to normal mode. Setting is
now complete.
* If you press the
ON/OFF
button before the
MODE
button, the settings you have made will be cancelled.

Mitsubishi MA Series Specifications

General

Brand	Mitsubishi
Model	MA Series
Category	Remote Control
Language	English