Mitsubishi MA Series User Manual

18
■
Display ex am ple
CHANGE
LANGUAGE
FUNCTION
SELECTION
MODE
SELECTION
DISP MODE
SETTING
Display
DRY mode
COOL mode
HEAT mode AUTO mode* No limitation
LIMIT TEMP
AUTO MODE
LIMIT TEMP
FUNCTION
LIMIT TEMP
HEAT MODE
LIMIT TEMP
COOL MODE
Setting range Standard setting
COOL·DRY Mode Lower limit 67 °F – 87 °F
67 °F – 87 °F
Upper limit 87 °F – 67 °F
HEAT Mode Lower limit 63 °F – 83 °F
63 °F – 83 °F
Upper limit 83 °F – 63 °F
AUTO Mode Lower limit 67 °F – 83 °F
67 °F – 83 °F
Upper limit 83 °F – 67 °F
* Temperatures can be set within the range of “upper limit ” “lower limit”.
4.2.3 Temperature Range Limit Setting
The temperature setting range can be limited.
It can be limited for each mode.
Cool mode : The temperature setting range for cool/dry mode can be changed.
Heat mode : The temperature setting range for heat mode can be changed.
Auto mode : The temperature setting range for auto mode can be changed.
OFF (default) : The temperature setting range is not limited.
* When a mode other than OFF mode is set, temperature setting range limit setting for cool, heat and auto modes will be made
simultaneously.
However, limit setting will not be made unless the range has been changed.
Limiting the Temperature Range
(1) While pressing the
MODE
button, press the
ON/OFF
button for two seconds to activate the remote controller’s
function selection mode.
(2) Press the
MODE
button to select
FUNCTION
SELECTION
on the screen (at ).
[Display ]
(3) Press the
MENU
button to select
LIMIT TEMP
FUNCTION
on the screen (at ).
* If a setting change was made previously, the mode that was set (one of the modes shown in step (4)) will be displayed.
(4) Press the
ON/OFF
button to select the mode for which temperature range limit setting is to be made.
[Display ]
* No operation modes will be displayed if auto mode has been set to OFF.

Mitsubishi MA Series Specifications

General

Brand	Mitsubishi
Model	MA Series
Category	Remote Control
Language	English