Mitsubishi Q02CPU User Manual

6 - 88
6.12 Writing in Program during CPU Module RUN
6.12.3 Precautions for online change
6
FUNCTIONS
POINT
The event that the trailing edge instruction is executed even when the execution
condition (ON OFF) is not established after the completion of online change
can be avoided by setting the "Instruction operational settings for online change/
file online change" on the Options screen in GX Developer.
Note6.31
The default value depends on the CPU module.Note32
• High Performance model QCPU, Process CPU, and Redundant CPU
The "Trailing edge instructions are not executed" checkbox is not
checked.
• Universal model QCPU
The "Trailing edge instructions are not executed" checkbox is checked.
Note32
Figure 6.58 Option menu screen in GX Developer
High
Performance
Process
Redundant
Note6.31 Note6.31Note6.31
Basic
Note6.31
The Basic model QCPU does not support the selection of trailing edge instruction execution/non-
execution at online change.
When selecting the trailing edge instruction execution/non-execution at online change in the High
Performance model QCPU, Process CPU, and Redundant CPU, check the versions of CPU
module and GX Developer. ( Appendix 4)
High
Performance
Process
Redundant
Note6.31 Note6.31Note6.31
Basic
Note6.31
The trailing edge instructions
whose execution condition
set to OFF are not executed
by checking the check box.

Mitsubishi Q02CPU Specifications

General

Brand	Mitsubishi
Model	Q02CPU
Category	Controller
Language	English