10 - 83
10.7 File Register (R)
10.7.6 Precautions for using file registers
10
DEVICE EXPLANATION
(d) Change of file register processing time depending on CPU module
version
Note10.23
Note25
When the file register is specified in the serial access format (ZR ) for the
access instruction to the standard RAM on the High Performance model QCPU of
which first 5 digits of serial No. are 02092 or later, the processing time per
instruction becomes longer than that of the High Performance model QCPU of
02091 or earlier. (The increased time per instruction is 1.1
s for the Q02CPU and
0.65
s for the QnHCPU on average.)
Table10.16 indicates the processing time taken when the MOV instruction is used.
Unit : s
Note25
Table10.16 Change of processing time depending on file register specifying method
Instruction
Q12HCPU Q02CPU
02092 or later 02091 or earlier 02092 or later 02091 or earlier
MOV K0 R0 0.11 0.11 0.26 0.26
MOV K0 ZR0 3.55 2.88 7.71 6.64
Process Redundant
Basic
Universal
UD
Note10.23
Note10.23
Note10.23
Note10.23
The Basic model QCPU, Process CPU, Redundant CPU and Universal model QCPU do not
change in file register processing time depending on the CPU module version.
Process Redundant
Basic
Universal
UD
Note10.23 Note10.23 Note10.23
Note10.23
To Next Page
Loading...
Need help?
General
