6-2
Chapter 6 COOLANT
Other Brand LLCs
When using LLC other than Mitsubishi Heavy Indus-
tries, Ltd. genuine long life coolant (LLC) "GLASSY
long life coolant (Ethylene glycol type)" or "PG
GLASSY long life coolant (propylene glycol type)", be
sure to use the LLC which meets the requirements by
Mitsubishi Heavy Industries, Ltd.
The quality and performance of commercially avail-
able LLCs as well as their component variations are
the responsibility of LLC suppliers.
Before purchasing commercial LLC, be sure to dis-
cuss the suitability of LLC with the LLC supplier.
Use all-season LLC (non-amine type) only. Do not use
antifreeze alone instead of LLC.
Requirements for Other
Brand LLC
If you have to use other brand LLCs, be sure to use
the LLC that meets the requirements below. Mitsubi-
shi heavy industries, Ltd. disclaims the warranty claim
concerning malfunctions caused by the use of LLC
that does not meet our requirements.
General Quality Requirements
for LLC
LLC must be a homogeneous liquid without sedi-
ment.
When the LLC is diluted to 30 to 60% density, the LLC
shall not cause any problems such as corrosion and
precipitation deposits in the engine cooling system.
LLC shall be mixed well with other non-amine type
LLC that meets this requirement and shall not sepa-
rate elements included in the each product, and shall
not decrease the performance of both products.
LLC shall not corrode the container and shall not pro-
duce a precipitate when LLC is left in the container for
6 months.
LLC shall be free from any abnormalities such as pre-
cipitates when kept at -20 to -25°C [-4 to -13°F] tem-
perature.
The validity period for the quality requirements for
products specified herein shall be 2 years after the de-
livery, provided that they are stored under indoor nor-
mal temperature.
Never mix Mitsubishi Heavy Industries, Ltd. genuine
LLC with other brand LLCs. Mixing with other brand
LLCs degrades the performance of the Mitsubishi
Heavy Industries, Ltd. genuine LLC.
To Next Page
Loading...
Need help?
General
