Mitsubishi UD8350 User Manual

EN-70
Troubleshooting (continued)
Others (continued)
Problem Solution
Abnormal sound is
heard.
• Becausethecolorwheelspinsatahighspeed,metallicsoundsmaybeheardinrare
occasions. Such symptom is not a malfunction.
• Thoughtherotationsoundofthecolorwheelmaybecomelouderwhenthesignalis
switched, such symptom is not a malfunction.
FOCUS/ZOOM
doesn’t work.
Lens shift doesn’t
work.
• CheckthatLENSLOCKintheINSTALLATION1menuisn’tON. (See page 34.)
If the following problem occurs after the lamp is replaced, check the following first.
Problem Solution
The projector does not
turn on.
• Fitthelampcoversecurely.(Seepages62and63.)
The LAMP indicator
illuminates red.
• Resetthelampoperatingtimeofthenewlyinstalledlamp.(Seepage63.)
Kensington Lock
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System.
Refer to the information that came with the Kensington System for instructions on how to use it to secure the
projector. Please contact Kensington Technology Group below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone: +1- (650)572-2700 Fax: +1- (650)572-9675

Mitsubishi UD8350 Specifications

General

Brand	Mitsubishi
Model	UD8350
Category	Projector
Language	English