USB port for charging
7-12 For pleasant driving
7
To use a plug-in type accessory, open the lid,
and insert the plug in the accessory socket.
The accessory socket can be used while the
operation mode of the power switch is in ON
or ACC.
E00778300444
The USB port for charging can be used as a
power source of the USB appliances when the
operation mode of the power switch is in ON
or ACC.
There are two USB ports for charging located
on the back of the floor console box.
When using the USB port for charging, con-
nect the USB connector cable to it.
Long use of the electric appliance when the
READY indicator is not illuminated may run
down the auxiliary battery.
When the accessory socket is not in use, be
sure to close the lid or install the cap,
because the socket might become clogged by
foreign material and be short-circuited.
Accessory sockets in two locations can be
used at the same time.
USB port for charging
1- USB port for charging (Type-A)
2- USB port for charging (Type-C)
Insert the USB connector cable in the USB
port for charging firmly.
If the USB connector cable does not insert in
it firmly, it may become extremely hot and
the fuses may blow.
To Next Page
Loading...
Need help?
General
