Mitsubishi XPANDER HEV 2023 User Manual

Instruments
5-2 Instruments and controls
5
E00500103444
E00531301969
Each time you press the rheostat illumination
button, there is a sound and the brightness of
the instruments changes.
E00573600059
This indicates the engine coolant tempera-
ture.
If the coolant becomes hot, “ ” will blink.
Instruments
1- Engine coolant temperature display
 P.5-2
2- 8 inch digital driver display  P.5-4
Information screen display  P.5-23
3- Fuel remaining display  P.5-3
4- Rheostat illumination button  P.5-2
Meter illumination control
1- Brightness level
2- Rheostat illumination button
NOTE
 You can adjust to eight different levels
respectively for when the position lamps are
illuminated and when they are not.
 The meter illumination switches automati-
cally to the adjusted brightness, depending
on the brightness outside the vehicle.
 The brightness level of the instruments is
stored when the operation mode of the power
switch is put in OFF.
 If you press and hold the button for approxi-
mately 2 seconds or more when the position
lamps are illuminated, the brightness level
changes to the maximum level. Pressing and
holding the button for approximately 2 sec-
onds or more again returns the brightness
level to the previous level.
It is recommended to use this function when
it is difficult to read the meter due to the
meter illumination is dimmed by turning on
the tail lamps in bright areas.
 The 8 inch digital driver display may become
dark in hot weather, but this is not a malfunc-
tion.
Engine coolant temperature
display
NOTE

Mitsubishi XPANDER HEV 2023 Specifications

General

Brand	Mitsubishi
Model	XPANDER HEV 2023
Category	Automobile
Language	English