Mitsubishi XPANDER HEV 2023 User Manual

Electric window control
3-22 Locking and unlocking
3
1. The inside alarm will be activated with
the security indicator blinking in time
with the sound for approximately 10 sec-
onds.
2. The alarm will be activated for approxi-
mately 30 seconds.
The turn-signal lamps will blink, and the
horn will sound intermittently.
3. The alarm will resume if unlawful actions
are taken again, even if the alarm has
stopped.
E00302002204
It is possible to halt the activation of an alarm
using the following methods:
 Pressing the LOCK or UNLOCK switch
on the key.
(After pressing of the LOCK switch, the
vehicle will lock if all the doors and the
tailgate are closed, after which the system
preparation mode will once again go into
effect.)
 Putting the operation mode of the power
switch in ON or ACC.
 Holding the keyless operation key and
locking or unlocking the doors and the
tailgate using the keyless operation func-
tion.
E00302202059
The electric windows can only be operated
with the operation mode of the power switch
in ON.
E00302303972
Each door window opens or closes while the
corresponding switch is operated.
Cancelling the alarm
NOTE
 Even if a door or the tailgate is closed while
the inside alarm is activating, this will not
cancel the alarm activation.
 When the operation mode of the power
switch is put in ON, the buzzer sounds four
times and the security indicator lamp blinks
four times. This operation indicates that the
alarm was activated while the vehicle was
parked.
Please check the inside of the vehicle to con-
firm that nothing was stolen.
 Even if the auxiliary battery is disconnected,
the alarm activation memory will not be
erased.
Electric window control
Electric window control switch
1- Driver’s door window
2- Front passenger’s door window
3- Rear left door window
4- Rear right door window
5- Lock switch
Driver’s switches

Mitsubishi XPANDER HEV 2023 Specifications

General

Brand	Mitsubishi
Model	XPANDER HEV 2023
Category	Automobile
Language	English