Service precautions
10-2 Maintenance
10
E01000103358
Adequate care of your vehicle at regular
intervals serves to preserve the value and
appearance as long as possible.
Maintenance items as described in this
owner’s manual can be performed by the
owner.
We recommend you to have the periodic
inspection and maintenance performed by an
authorised MITSUBISHI MOTORS dealer or
another specialist.
In the event a malfunction or a problem is
discovered, we recommend you to have it
checked and repaired. This section contains
information on inspection maintenance pro-
cedures that you can do yourself. Follow the
instructions and cautions for each of the vari-
ous procedures.
Service precautions
A- Cooling fan
B- Caution label
C- Radiator cap
D- EV cooling system reserve tank cap
*: Front of the vehicle
Before performing inspection or mainte-
nance, confirm that the operation mode of
the power switch is set to OFF.
Never touch the high-voltage parts in the
engine compartment. Never remove or
disassemble the high-voltage components,
cables (orange) or connectors.
Failure to observe this instruction could
cause an electric shock which result in a
serious injury or death. These parts have
labels that indicate handling precautions.
Follow the instruction on these labels.
Contact an authorised MITSUBISHI
MOTORS dealer for any necessary main-
tenance.
Refer to “High-voltage components” on
page 2-8.
When checking or servicing the inside of
the engine compartment, make sure the
Hybrid EV System is stopped and has had
a chance to cool down.
If it is necessary to do work in the engine
compartment with the Hybrid EV System
starting, be especially careful that your
clothing, hair, etc., does not become
caught by the cooling fans, drive belts, or
other moving parts.
After performing the maintenance work,
make sure that no tools or cloths are left
behind in the engine compartment.
If they are left behind, a fire or damage to
the vehicle may occur.
To Next Page
Loading...
Need help?
General
