Moog One User Manual

126
SETTINGS
SETTINGS
Pressing the SETTINGS button opens the door to a host of under-the-
hood functions that control Moog One global parameters, congure
hardware controls and connections, manage libraries, and administer
rmware updates.
Three Soft Buttons at the top of the
screen open the GLOBAL, LIBRARY, and
TUNING pages, respectively. The left pane
shows the Settings Category; the right
pane shows the individual parameters
of that category. Rotating the Master
Encoder will select and highlight an
item from the list shown in the left pane.
Pressing down on the Master Encoder
will move the red-colored cursor to the
right pane, where an individual parameter
may be selected and highlighted by
rotating the Master Encoder. The Settings
Category will remain highlighted in gray.
Values for the specic parameter selected in this right pane are controlled using the Soft Knobs(s) at
the bottom of the screen.
TIP: When the cursor is located on the right pane, pressing down on the Master Encoder will launch an
action or enter a sub-menu for the selected item, if available. To move the cursor back from the right to
the left pane, press the BACK Soft Button.
GLOBAL
The Settings screen opens to the Global page. If the Global page is not selected, press the GLOBAL
Soft Button at the top of the screen.

Moog One Specifications

General

Brand	Moog
Model	One
Category	Synthesizer
Language	English