131
MIDI CONTROL
Moog One MIDI and CV implementation will be greatly expanded over the coming weeks. New features
are actively in development and will be ready soon. These will include: analog clock input and output,
CV Pitch/Gate functionality, MIDI Clock output, and full MIDI CC and NRPN input and output.
Please register your instrument at www.moogmusic.com/register to receive the latest rmware updates
as they become available.
The MIDI CONTROL parameters dene how Moog One will communicate with other devices, and
determine what types of MIDI data is being shared. Use the Master Encoder to scroll through the
parameters, and use the Soft Knobs at the bottom of the screen to set the value.
RECEIVE MIDI CLOCK (OFF, ON)
When this parameter is set to On, Moog One will receive timing and tempo information from an
external MIDI source, overriding the internal Master Clock.
RECEIVE MIDI START/STOP (OFF, ON)
When this parameter is set to On, Moog One will receive Start and Stop commands from an external
MIDI source. It is possible to receive Start and Stop command independent of the Clock signal.
To Next Page
Loading...
Need help?
General
