Moog One User Manual (English)

To Next Page

To Previous Page

135

CV INPUTS (Continued)

SYNTHS (SYNTH 1, SYNTH 2, SYNTH 3, SYNTH 1 & 2, SYNTH 1 & 3, SYNTH 2 & 3, ALL SYNTHS)

This parameter species which Synth the CV signal is being applied to. It can be applied to all three

Synths, an individual Synth, or any combination of two Synths.

NOTE: This parameter is unavailable and will default to the All Synths option when the FUNCTION

parameter is set to INPUT TO MOD MATRIX.

VOLTAGE MIN (-5.00V to +5.00V)

This parameter allows the value of the minimum voltage setting to be freely set anywhere in the

-5 to +5 Volt range.

VOLTAGE MAX (-5.00V to +5.00V)

This parameter allows the value of the maximum voltage setting to be freely set anywhere in the

-5 to +5 Volt range.

TIP: Note that the VOLTAGE MIN parameter can be set to a higher value than the VOLTAGE MAX value,

allowing inverted sweeps of a parameter value, etc.

CV OUTPUTS

Moog One MIDI and CV implementation will be greatly expanded over the coming weeks. New features

are actively in development and will be ready soon. These will include: analog clock input and output,

CV Pitch/Gate functionality, MIDI Clock output, and full MIDI CC and NRPN input and output.

Please register your instrument at www.moogmusic.com/register to receive the latest rmware updates

as they become available.

Moog One is equipped with four 1/4” Control Voltage (CV) Outputs on the rear panel – CV OUT 1, CV

OUT 2, CV OUT 3, and CV OUT 4. All of these outputs can be congured to work with a variety of CV

destinations, from other modular and Eurorack synthesizers, to standalone CV synthesizers.

LOAD FROM PRESET (OFF, ON)

The CV OUTPUT settings made here can be saved as part of the current Preset. By setting the LOAD

FROM PRESET parameter to On, these setting will be restored each time the Preset is loaded. With the

LOAD FROM PRESET parameter Off, the CV OUTPUT settings will remain in their current conguration.

CV OUT 1; CV OUT 2; CV OUT 3; AND CV OUT 4 PARAMETERS

The parameters listed below are identical for every CV OUTPUT; however, they are set individually

using a repeating format for each CV OUTPUT.

SOURCE

This parameter selects the source of the control voltage signal present at the chosen jack.

CV OUTPUT SOURCES

OUT VOLTAGE MIN (-5.00V TO +5.00V)

This parameter allows the value of the minimum voltage setting to be freely set anywhere in the

-5 to +5 Volt range. Volt range.

OUT VOLTAGE MAX (-5.00V TO +5.00V)

This parameter allows the value of the maximum voltage setting to be freely set anywhere in the

-5 to +5 Volt range. Volt range.

GATE PAD X

PITCH WHEEL PAD Y

MOD WHEEL PAD PRESSURE

AFTERTOUCH PAD GATE

Need help?

Do you have a question about the Moog One and is the answer not in the manual?

Moog One Specifications

General

Keyboard	61-note Fatar TP-8S with velocity and aftertouch
Arpeggiator	Yes
Polyphony	8 or 16 voices
Oscillators	3 per voice
LFOs	4 per voice
Envelopes	3 per voice
Sequencer	Yes
Connectivity	MIDI In/Out/Thru, USB, CV/Gate
Weight	45 pounds (20.4 kg)
Filter	2 filters per voice: a state-variable filter and a Moog ladder filter