To Next Page

To Previous Page

MIXER (Continued)

NOISE

Use the NOISE knob to set the level of the Noise Generator

signal as it enters the Mixer. Press the associated SVF and

LADDER buttons to specify which FILTE R(s) the Noise

Generator is being routed to. When each button is lit, it is

On, and that lter path is enabled.

MIXER MORE PAGE (EXTERNAL INPUT CHANNEL)

Pressing the triangular MORE button in the upper right corner of the

Mixer module will reveal additional Mixer parameters. The left pane

displays the current Mixer input levels, bar-graph style. The square

boxes associated with each input turn white to indicate which Filter

buss(es) are in use. The rst column of boxes indicates the SVF lters,

the second column indicates the Ladder lter. This visual information

reects the physical knob and button settings from the Front Panel

controls. The right pane shows the current value of the Front Panel

hardware parameters for this module.

The nal Mixer input channel is labelled External, and has no corresponding Front Panel hardware.

Instead, this input is controlled using the rst three Soft Knobs at the bottom edge of the screen.

NOTE: Pressing the (now) illuminated MORE button will exit the MORE page and recall the HOME screen.

The onscreen MORE page parameters

are edited using the soft knobs below the

screen.

CHANGING THE VALUE

Rotate the Soft Knob below the parameter

name to change its value. In some cases,

the Soft Knob simply turns a function on

or off. In other cases, it may choose from

a list of values or settings, and in yet other

cases, the soft knob is dialing in a value –

either an absolute value or a percentage.

EXT. INPUT LEVEL (0% to 100%)

This parameter sets the input level to the mixer from the External Audio Input signal.

EXT. INPUT ROUTE (NONE, SVF, LADDER, BOTH)

This parameter species which Filter(s) the External Audio Input signal is being routed to.

EXT. INPUT SOURCE (NONE, MIC/LINE, LINE, MIC/LINE+LINE)

This parameter species which physical EXT. INPUT jack(s) is the source of the EXT. INPUT signal.

Moog One User Manual

Questions and Answers: