Page 15
1
ESSENTIAL INFORMATION
End the conversation by:
To stop alert signal without answering:
Call in Absence
When a call has been received but the phone
has not been answered, the message
“*CALL*” will be displayed. If the phone is
locked the message “LOCKED” will appear
after pressing the
button to clear the
“*CALL*” message from the display.
ADVANCED CALL PLACEMENTS
ADVANCED CALL PLACEMENTS
Automatic Redial
Automatic Redial
If a call attempt is unsuccessful, you may
enable an automatic redial procedure.
The telephone will then initiate multiple redial
attempts until the call is connected, a call is
received, or the redial procedure times out.
How to operate:
After a failed attempt, such as subscriber busy,
Before ending the call
The display will show: ‘Redial’ as long
as the automatic redial procedure is active.
When the redial is successful, your phone
will ring once to alert you.
To Next Page
Loading...
Need help?
General
