Page 25
ADVANCED INFORMATION
2
If you are accepted by the system, the display
will show the network operator code and the
indicator will start flashing indicating that
you are registered on a non-preferred system.
If you are not accepted by the system, the
indicator will flash.
You may then continue as described in the
section, "Manual Roaming".
Manual Roaming
Manual Roaming
You may manually select a network operator
from a list of those providing coverage at your
immediate location.
To see the list of available network operators:
Operators are listed in order of decreasing
signal strength. The display shows the first
network operator as:.
Position of list (1-9, A-W)
Star = Preferred Operator
Blank = Non-Preferred Operator
Network Operator Code
The lower line of the display may show the
name of the network operator or the country
abbreviation with the network number.
The procedure for scrolling/selecting is
described in the section "Automatic Roaming"
To Next Page
Loading...
Need help?
General
