ADVANCED INFORMATION
2
Page 64
If however the feature is off, a second caller
will hear the busy tone.
Call Holding
This feature is controlled by your Network
Operator and is used in conjunction with the
call waiting feature to produce several
different results.
Call Hold and Waiting Combinations
If a call is active and there is no call waiting:
The active call will be placed on hold and
the display will show ‘Holding’ to indicate
that the hold request is in progress. The
display will show ‘Call Holding’ when the
process is complete.
or
The active call will end and the phone will
be available for further calls.
If a call is active and there is a call waiting:
The active call will be placed on hold and
the display will show ‘Holding’ to indicate
that the hold request is in progress. When
the call has been held, the display will
show ‘Accepting’ to show that the waiting
call is being connected. ‘Call Holding’ will
be shown when the process is complete.
or
The display will show ‘Please Wait’ while
To Next Page
Loading...
Need help?
General
