SECTION 2, INSTALLATION 2-1
Section 2:Installation
To get your network up and running:
! Setup your hardware.
! Insert the CD-ROM for Product Setup. Follow the prompts.
If you prefer to setup the router’s software manually, refer to the
Manual Software Setup found later in this section.
The following sections provide detailed instructions for completing
these tasks.
Hardware Setup
Hardware setup includes:
! Antenna Installation: connecting the antenna to the unit.
! Physical Installation: where you physically place your unit.
! Electrical Connection: how to connect the power cord.
Antenna Installation
When shipped, the antenna is separate from the main unit. You are
required to attach the antenna to the main unit.
1 Take the bottom of the antenna and locate, on the right backside
of the unit, the threaded knob.
2 Screw the antenna connector clockwise on to the threaded knob
until firmly seated. Do not overtighten.
Router Physical Installation
You can install the router in various physical orientations –
horizontally, vertically, or hung on the wall. Your own needs
determine the best placement.
To Next Page
Loading...
Need help?
General
