10
10.2 R --- 08:23
KAOS
CALIBRATE
Select Aircraft
CALIBRATE
Press Option
CALIBRATE
Aircraft Name
CALIBRATE
Timer
CALIBRATE
EXIT
CALIBRATE
Snap
CALIBRATE
Servos
CALIBRATE
Mixers
CALIBRATE
Options
CALIBRATE
Shared Options
RUN CAL
Press
Option
Moving Aileron stick
to the right advances in
the direct of the arrows.
Moving Aileron stick
to the left reverses
the direction.
Press Option from any
selection to enter the
selected function.
You can move the
Mode switch back
to RUN to exit the
Calibration mode
at any point.
The PC interface utility can
only communicate with the
MicroStar when this is on
the display!
Entering the Calibration mode
Typical Run mode display
CALIBRATE
Select Frequency
CALIBRATE
System Setup
Top level calibration menu, select the category of items
you would like to adjust.
CALIBRATE
Switches