MSI MS-6178 User Manual

CHAPTER 4
AMI
®
BIOS USERS GUIDE
4-7
Boot up Num Lock
When this option is set to Off, AMI
®
BIOS turns off the Num Lock
key when the system is powered on. The end user can then use the arrow
keys on both the numeric keypad and the keyboard. The settings are On or
Off. The optimal default and Fail-Safe default settings are On.
Floppy Drive Swap
Set this option to Enabled to specify that floppy drives A: and B: are
swapped. The setting are Enabled and Disabled. The Optimal and Fail-Safe
default settings are Disabled.
Floppy Drive Seek
When this option is set to Enabled, AMI
®
BIOS performs a Seek
command on floppy drive A: before booting the system. The settings are
Enabled and Disabled. The Optimal and Fail-Safe default settings are
Disabled.
PS/2
®
Mouse Support
When this option is set to Enabled, AMI
®
BIOS supports a PS/2
®
mouse. The settings are Enabled and Disabled. The Optimal and Fail-Safe
default settings are Enabled.
Primary Display
This option configures the primary display subsytem in the computer.
The settings are Mono(monochrome), 40CGA, 80CGA or VGA/EGA. The
optimal and Fail-Safe default settings are VGA/EGA.
Password Check
This option specifies the type of AMI
®
BIOS password protection
that is implemented. The Optimal and Fail-Safe default settings are Setup.
Boot To OS/2
®
> 64MB
Set this option to Enabled to permit the BIOS to run properly, if OS/
2
®
is to be used with > 64MB of DRAM. The settings are Enabled or
Disabled. The Optimal and Fail-safe default settings are Disabled.

MSI MS-6178 Specifications

General

Brand	MSI
Model	MS-6178
Category	Motherboard
Language	English