CHAPTER 4
AMI
®
BIOS USERS GUIDE
4-12
4.5 Power Management Setup
1. Press <ENTER> on “Power Management Setup” of the main menu
screen.
2
.
Use <Up> and <Down> to choose the item and <PgUp> and
<PgDn> keys to modify the highlighted item.
3. After you have finished with the Power Management Setup, press
<ESC> to go back to the main menu.
ACPI Standby State S1
Power Management/APM Enabled
Green PC LED Status Blinking
Green PC Monitor Power State Stand By
Video Power Down Mode Suspend
Hard Disk power Down Mode Stand By
Standby Time Out (Minute) Disabled
Suspend Time Out (Minute) Disabled
Throttle Slow Clock Ratio 50.0%
Keyboard & PS/2 Mouse Access Monitor
FDC/LPT/COM Ports Access Monitor
SB & MSS Audio Ports Access Ignore
Midi Ports Access Ignore
ADLIB Ports Access Ignore
Primary Master IDE Access Monitor
Primary Slave IDE Access Ignore
Secondary Master IDE Access Monitor
Secondary Slave IDE Access Ignore
PIRQ[A] IRQ Active Ignore
PIRQ[B] IRQ Active Ignore
PIRQ[C] IRQ Active Ignore
PIRQ[D] IRQ Active Ignore
System Thermal Ignore
Thermal Slow Clock Ratio 50.0%
CPU Critical Temperature 650C/1490F
Power Button Function On/Off
Restore on AC/Power Loss Last State
Ring Resume from Soft Off Disabled
LAN Resume from Soft Off Disabled
PME Function Support Disabled
ESC:Exit :Sel
PgUp/PgDn:Modify
F2/F3:Color
AMIBIOS SETUP - POWER MANAGEMENT SETUP
(C) 1999 American Megatrends, Inc. All Rights Reserved
Available Options:
Disabled
Enabled
RTC Alarm Resume from Soft Off Disabled
RTC Alarm Date 15
RTC Alarm Hour 12
RTC ALarm Minute 30
RTC Alarm Second 30
To Next Page
Loading...
Need help?
General
