National Instruments PXI Series User Manual

Chapter 4 Common Configuration Questions
NI PXI-8109 User Manual 4-6 ni.com
What is the purpose of the W1 jumper on the NI PXI-8109?
Figure 4-3. The W1 Jumper on an NI PXI-8109 Controller
The W1 jumper enables reserved features for National Instruments factory
testing only. The W1 jumper is not needed for normal operation, and the
shunt should be left in the default position (with the shunt on pins 1 and 2,
or with the shunt removed entirely). If the shunt is in the wrong position,
the BIOS will display a warning message.
Where do I get the latest software drivers?
The latest National Instruments software is available from
ni.com/
downloads
. For peripheral drivers, refer to KnowledgeBase 3H3COSD8,
What Peripheral Drivers Should I Use with My PXI or VXI Controller?,
at
ni.com.
1Default Position 2Reserved
1
2
1
3
2
1
3
2

National Instruments PXI Series Specifications

General

Brand	National Instruments
Model	PXI Series
Category	Chassis
Language	English