Native Instruments Guitar Rig 5 User Manual

Dragging from the Component Pool will replace the Matched Cabinet (highlighted) in the Rack
▪ All
the knobs and switches you see are controlling the amp’s sound. Clicking with the
mouse flips the switches, clicking and dragging the mouse up and down (while hold-
ing the mouse button down) turns the knobs.
▪ If you want to check out some amp settings recommended by our sound designers, try
the pull down menu to configure the Jump. Click on the arrow to display the Compo-
nent Presets.
Component Presets
3.1.3 Basics for Rack Building
The audio signal runs through the chain of rack modules from top to bottom, except if you
are using special tools that create parallel processing paths, like the Split. See the Compo-
nents Reference for details on these tools.
Components and the Rack
Building a Rack from Scratch
GUITAR RIG 5 - Application Reference - 22

Native Instruments Guitar Rig 5 Specifications

General

Brand	Native Instruments
Model	Guitar Rig 5
Category	Software
Language	English