Native Instruments TRAKTOR KONTROL S4 User Manual

3. While holding the top plate, quickly spin the Jog Wheel back and fourth for scratching the
track.
When you release the top plate, the Jog Wheel continues to rotate and the Deck playback
continues.
By enabling the option Enable Haptic Hotcues in the Preferences, you will then feel
a haptic feedback in the Jog Wheel when cuing Cue Points and Loop markers using
the top plate. For more information, refer to Preferences.
7.3. Assigning Mixer Channels to the Crossfader
The crossfader is used for making transitions between the Mixer channel signals. Any mixer chan-
nel can be assigned to either crossfader side as well as being un-assigned. If you do not intend to
use the crossfader, we recommend to unassign the Mixer channels from the crossfader to prevent
accidental usage in a live situation.
Furthermore, you can determine the fading behavior for the audio signals when moving the cross-
fader.
Assigning Mixer Channels
For any Mixer channel there is a crossfader assign selector on the front panel.
To assign the Mixer channel to the left crossfader side:
• Set the crossfader assign selector for the corresponding Mixer channel to the left.
Tutorials
44

Native Instruments TRAKTOR KONTROL S4 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S4
Category	DJ Equipment
Language	English