Native Instruments TRAKTOR KONTROL S4 User Manual

7.6. Using Cue Channel
You can use the CUE channel on the Mixer to preview and tracks in the headphones. Any Mixer
channel is equipped with a CUE button to route the audio signal into the CUE channel. The MIX
and VOL knobs are used for determining the level for the CUE channel, as well as the ratio be-
tween the cued signal and the master signal.
Routing Audio Signals into the Cue Channel
To route the audio signal from Mixer channels into the CUE channel:
• Press any CUE button in the Mixer channel.
The audio signal is audible in the CUE channel.
You can route the audio signals of all Mixer channels into the CUE channel at once.
Adjusting the Ratio between the Cue-Mix Signal
In the CUE channel, the MIX knob lets you determine the ratio between the cued signal and the
master signal.
1. Turn the MIX knob clockwise to let the MASTER signal dominate.
When you turn the MIX knob entirely clockwise, you will only hear the MASTER signal in the
headphones.
2. Turn the MIX knob counter-clockwise to introduce the Mixer channel signal.
When you turn the MIX knob entirely counter-clockwise, you will only hear the Mixer channel
signal in the headphones.
Adjusting the Cue Channel Level
To adjust the Cue channel level:
• Turn the VOL knob clockwise or counter-clockwise to increase or to decrease the CUE chan-
nel level, respectively.
Tutorials
49

Native Instruments TRAKTOR KONTROL S4 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S4
Category	DJ Equipment
Language	English