The Quantize value changes accordingly.
7.17.1. Using Pattern Recorder
The Pattern Recorder allows you to program sequences to be played by the Samples in the Remix
Slots. When the Pattern Recorder is enabled, you can instantly play and record your sequences by
tapping the Pads. Upon recording, the sequences will automatically be quantized and instantly
play back in sync to the Deck tempo and repeat. You can program sequences up to 16 steps.
The Pattern Recorder is meant to be used with one-shot Samples such as kick drum, snare, hi-
hat, sound FX, etc. The usage of Loops will also work, but may not bring the appropriate results.
Enabling Pattern Recorder
To enable Pattern Recorder:
1. Load a Remix Set into a Deck.
The Deck Type switches to Remix Deck. Alternatively, you can load individual Samples into
an empty Remix Deck.
2. To enable Pattern Recorder, press the record button on the Deck.
The Pattern Recorder is enabled and the record button brightly lights up red.
Recording Sequences
Once the Pattern Recorder is enabled you can play and record your sequences:
• Play your sequences by tapping Pad 1 - Pad 4, corresponding to the Samples.
The Pattern Recorder instantly records your sequences and repeat them.
Removing a Sequence
To remove a sequences:
• Press and hold SHIFT + press the Pad corresponding to the sequence you want to remove.
The sequence is removed. You can now tap in a new sequence on that Pad.
7.18. Working with STEM Decks
In this section you will learn how to load and play back a STEM File, how to adjust volumes and
apply Filter FX on individual STEM parts in the STEM Decks.
Tutorials
70
To Next Page
Need help?
General
