1-36
English
English-7
LANGUAGE: Selecting preferred language used in the OSD menus. Under Main Menu, scroll to Language using [+] or
[–] button, then press [MENU] button to activate the function. Press [+] or [–] button to choose preferred Language,
then press [MENU] to return to Main Menu.
MAIN MENU: Returning to OSD main menu. Press [+] or [–] button to select MAIN MENU, then press [MENU]
button to return to OSD Main Menu.
MISC Sub-Menu
Under the Main Menu, select MISC using the [+] or [–] button, then press [MENU] button to enter MISC Sub-Menu.
RESOLUTION NOTIFIER: This optimal resolution is 1280 x 1024. If ON is selected, a message will appear on
the screen after 30 seconds, notifying you that the resolution is not at 1280 x 1024.
H-OSD POSITION: Moving the OSD position on the screen to the right or left. Select H-OSD POSITION using
[+] or [–] button, then press [MENU] button to activate the function. Press the [+] button to move the OSD
position to the right, [–] button to move left. Then press [MENU] to return to MISC Sub-Menu.
V-OSD POSITION: Moving the OSD position on the screen up or down. Select V-OSD POSITION using [+] or
[–] button, then press [MENU] button to activate the function. Press the [+] button to move the OSD position up,
[–] button to move down. Then press [MENU] to return to MISC Sub-Menu.
SMOOTHING: Making the displayed texts smooth. Select SMOOTHING using [+] or [–] button, then press
[MENU] button to activate the function. Press [+] or [–] button and adjust to your liking. Press [MENU] button
to return to MISC Sub-Menu.
INVISIBLE: Activating the OSD background to be invisible. Select INVISIBLE using the [+] or [–] button, then
press [MENU] button to select either On or Off option.
INFORMATION: Displaying the timing mode (video signal input) coming from the graphics card in the computer.
Select INFORMATION using the [+] or [–] button, then press [MENU] to display the mode. Then press [MENU]
button to return to MISC Sub-Menu.
RECALL: Returning the adjustments back to factory settings if the monitor is not operating at its original factory
settings. Select RECALL using the [+ or [–] button, then press [MENU] button to reset the settings.
MAIN MENU: Returning to OSD main menu. Press [+] or [–] button to select MAIN MENU, then press [MENU]
button to return to OSD Main Menu.
EXIT: Turning off the OSD. Select EXIT using the [+] or [–] button, then press [MENU] to exit the OSD.
OSD Warning
NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is
a change of input signal or video is inactive, the No Signal window will appear.
RESOLUTION NOTIFIER: This function gives a warning of use with optimized resolution. After power is turned on or
when there is a change of input signal or the video signal doesn’t have proper resolution, the Resolution Notifier
window will open. This function can be disabled in the MISC Sub-Menu.
OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is
turned on or there is a change of input signal or the video signal doesn’t have proper timing, the Out Of Range menu
will appear.
To Next Page
Loading...
Need help?
General