5-20
3. Inspection of PLUG & PLAY communication and OSD for model name/ serial number
3.1 System Connection
This system should be connected as shown below.
PC
Printer Cable
D-SUB Signal Cable
PROGRAM
Part No. 599910552
MONITOR
PC In
Signal In
Signal Out
A Type
Signal Out
B Type
DC +5V
CONNECTOR (Power Supply)
Part No. 599910594
AUTO ADJ I/F BOX
DVI to D-SUB Signal Cable (Special)
Part No. 599910604
DVI to D-SUB Signal Cable (Special)
(Part No. : 599910604)
3.2 Input Signal
Horizontal sync frequency: Not specified.
Vertical sync frequency: Not specified.
Because a writing equipment is in the signal-less condition at the time of EDID data writing, OSD of "NO Signal"
is indicated on the screen.
The pins
of there
points cuts
it.
To Next Page
Loading...
Need help?
General