To Next Page

To Previous Page

Configuration Note 4. Configuring AudioCodes E-SBC

Version 7.0 61 AudioCodes Mediant E-SBC

4.12 Step 12: Miscellaneous Configuration

This section describes miscellaneous E-SBC configuration.

4.12.1 Step 12a: Configure SBC Alternative Routing Reasons

This step describes how to configure the E-SBC's handling of SIP 503 responses received

for outgoing SIP dialog-initiating methods, e.g., INVITE, OPTIONS, and SUBSCRIBE

messages. In this case E-SBC attempts to locate an alternative route for the call.

 To configure SIP reason codes for alternative IP routing:

1. Open the SBC Alternative Routing Reasons page (Configuration tab > VoIP menu >

SBC > Routing SBC > SBC Alternative Routing Reasons).

2. Click Add; the following dialog box appears:

Figure 4-38: SBC Alternative Routing Reasons Table - Add Record

3. Click Submit.

NEC SV9100 Configuration Note

Other manuals for NEC SV9100