NetComm Wireless NTC-30WV 3G Outdoor Router with Voice
WAN configuration
The WAN configuration page allows you to configure the connection type and metric of the available WAN connections. To access
the WAN configuration page, click on the Networking menu at the top of the screen, click on the Ethernet LAN/WAN menu on the
left then select the Ethernet WAN menu item.
Figure 53 - Ethernet WAN configuration
Use this field to select the WAN interface to configure.
Selects whether the WAN interface has static IP settings or DHCP.
NAT masquerading allows the router to modify the packets sent and received to inform remote computers on the
internet that packets originating from a machine behind the router actually originated from the WAN IP address of
the router’s internal NAT IP address.
The IP address to assign to the selected WAN interface.
The Subnet mask of the IP address above.
The gateway to assign this WAN interface.
The first DNS server for the WAN interface.
The second DNS server for the WAN interface.
The metric value is used to define the priority of the interface. Lower metric values indicate higher priority.
Table 21 - Ethernet WAN configuration options
To Next Page
Loading...
Need help?
General
