OMA Lightweight M2M configuration
Note: The OMA Lightweight M2M specification has not yet been finalised. As such, the current implementation of OMA-
LWM2M is experimental and should not be deployed for regular use. We also do not recommend using OMA-LWM2M
while the router is connected to an APN providing a publicly routable IP address.
The OMA Lightweight M2M (OMA-LWM2M) protocol was designed by the Open Mobile Alliance to provide remote device
management specifically for M2M devices. It is less taxing on the system and network than OMA-DM and TRS-069. OMA-LWM2M
runs over UDP and supports asynchronous notifications when a resource changes.
It provides:
Firmware upgrades
Device monitoring and configuration
Server provisioning
Figure 108 - OMA Lightweight M2M configuration
To Next Page
Loading...
Need help?
General
