Name: NETGEAR C6300
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Specify Network Settings

AC1750 WiFi Cable Modem Router

Specify the IP Addresses That the Modem Router Assigns

By default, the modem router acts as a Dynamic Host Configuration Protocol (DHCP) server.

The modem router assigns IP, DNS server, and default gateway addresses to all computers

connected to the LAN. The assigned default gateway address is the LAN address of the

modem router.

These addresses must be part of the same IP address subnet as the modem router’s LAN IP

address. Using the default addressing scheme, define a range between 192.168.0.2 and

192.168.0.254, although you can save part of the range for devices with fixed addresses.

The modem router delivers the following parameters to any LAN device that requests DHCP:

• An IP address from the range that you have defined

• Subnet mask

• Gateway IP address (the modem router’

s LAN IP address)

• DNS server IP address (the modem router’s LAN IP address)

 To specify the pool of IP addresses that the modem router assigns:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. T

ype http://routerlogin.net or http://192.168.0.1.

A login screen displays.

3. Enter the modem router user name and password.

The user name is admin

The default password is password.

The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADVANCED > Setup > LAN Setup.

Other manuals for NETGEAR C6300

Questions and Answers:

Need help?

Do you have a question about the NETGEAR C6300 and is the answer not in the manual?

General